Logo PD Water Systems

Pearl - Surge Arrestor

Surge Arrestor - Tanks

A shock arrestor is a pressurized air chamber that when installed in the pipe system, it absorbs the initial shock and reduces the shock pressure to a controlled level. When the shock has been absorbed by the arrestor, the shock wave is eliminated.

The shock arrestor can be installed anywhere in the pipe line, but it is most effective when installed as close as possible to the cause of the shock (toilet valve, washing machine hoses, dishwasher supply lines, etc.), in our case, it would be as close as possible to the pump system.

In order to work properly, the shock arrestor needs to be pre-charged. Such pre-charge pressure should be set equal to the system working pressure (City Pressure + Boosted pressure).

The surge arrestor sizing is based on the length of the pipe line, the diameter of the pipe and the flowing water pressure. The chart below lists common applications and size selection. Larger arrestors are available in the market for larger systems and should be sized on case by case scenarios.
Surge Arrestor
Make click to enlarge the image or other views
zoom

Surge Arrestor

Click the menu to display technical information and do comparison

CHECK OUR COMPLETE LINE OF PRODUCTS